GLI L4-2.0L Turbo (CCTA) (2008)
/Page-1057003.png)
‹› Inner brake pad (piston side) with large three finger clip - 1 -.
‹› Outer brake pad with small three finger clip - 2 - (colored black).
-
Place the brake caliper with the brake pads on the brake carrier first at the bottom - arrow -.
-
Tighten the brake caliper to the brake carrier using the guide pins- arrows -.
‹› The pin of the brake caliper must stand behind the guide of the brake carrier!
-
Install both protective caps.
