GLI L4-2.0L Turbo (CCTA) (2008)
14
Wheel speed sensor
‹› Before installing the sensor, clean the inner surface of the bore and coat with hot bolt paste (G 052 112 A3).
15
Bolt, 8 Nm
16
Cover plate
17
Hex/Torx bolt, 12 Nm
‹› M6 x 10 hex bolt, changed from a M6 x 12 Torx bolt.
‹› Replace a hex bolt with a hex bolt and a Torx bolt with a Torx screw.
18
Wheel bearing/hub unit
‹› The ABS sensor ring is installed in the wheel bearing.
16 Inch Caliper
1
Bolt, 12 Nm
2
Brake disc
‹› Internally vented: 312 mm diameter.
‹› Thickness: 25 mm
‹› Wear limit: 22 mm