GLI L4-2.0L Turbo (CCTA) (2008)
CAUTION!
During production, the fitting threads were changed from M10 x 1 to M12 x 1.
2
Hydraulic unit to right front brake caliper
Identification: Fitting with either M10 x 1 or M12 x 1 threads
CAUTION!
During production, the fitting threads were changed from M10 x 1 to M12 x 1.
3
Hydraulic unit to right rear brake caliper
Identification: Fitting with M10 x 1 threads
4
Hydraulic unit to left rear brake caliper
Identification: Fitting with M12 x 1 threads
ABS Mark 60 (ABS, EDL, ASR and ESP, Through 07.04.08
Connecting Brake Lines from Master Cylinder to Hydraulic Unit
On the Master Cylinder
A Primary piston circuit of master cylinder to hydraulic unit
Identification: 6.5 mm diameter and fitting with M12 x 1 threads
B Secondary piston circuit of master cylinder to hydraulic unit
Identification: 6.5 mm diameter and fitting with M12 x 1 threads
1
Hydraulic unit to left front brake caliper
3
Hydraulic unit to right rear brake caliper
4
Hydraulic unit to left rear brake caliper
On the Hydraulic Unit