GLI L4-2.0L Turbo (CCTA) (2008)
1.9L Diesel Engine
-
Disconnect the connection hose to intake connection.
-
Remove the intake flap motor.
2.0L Diesel Engine
-
Remove the connecting pipe between the intake hose and turbocharger.
-
Remove the upper part of toothed belt cover.
Diesel Engines with Particulate Filter
-
Disconnect the connector for the Exhaust Gas Temperature (EGT) sensor 4 - 2 - and the Heated Oxygen Sensor (HO2S) - 3 -.
-
Unclip the EGT sensor 4 and the HO2S wires from the brackets on the plenum chamber and engine.
-
Disconnect the electrical connector - 1 - for the exhaust pressure sensor 1.
-
Remove the bolt - 2 - and then remove the bracket - 3 - together with the exhaust pressure sensor 1 in - direction of arrow -.
-
Move the bracket - 3 - and the exhaust pressure sensor 1 forward.
-
Remove the engine cover
-
Remove the particulate filter bracket bolt - 1 -.