GLI L4-2.0L Turbo (CCTA) (2008)
‹› Do not disassemble the vacuum pump.
Installing
Tightening specifications:
‹› With engine code CCTA, refer to --> [ Cylinder Head Assembly Overview, Engine Code CCTA ] See: Engine, Cooling and
Exhaust/Engine/Cylinder Head Assembly/Service and Repair/Cylinder Head Assembly Overview, Engine Code CCTA.
‹› With engine code CBFA, refer to --> [ Cylinder Head Assembly Overview, Engine Code CBFA ] .
-
Clean the sealing surfaces.
-
Install the seal on the vacuum pump, install the 2 bolts and then install it to the cylinder head.
The rest of the assembly is performed in the reverse order of removal.