GLI L4-2.0L Turbo (CCTA) (2008)
7
Bolt, 9 Nm
8
Oil Pump
‹› Removing and installing, refer to --> [ Oil Pump ] See: Oil Pump/Service and Repair/Oil Pump.
‹› Oil pressure and switch, checking. Refer to --> [ Oil Pressure and Switch, Checking ] See: Engine Oil Pressure/Testing and Inspection.
9
Alignment Bushing
‹› For centering the oil pump.
10
Chain Tensioner
‹› For the oil pump drive chain
11
Guide Pin, 9 Nm
12
Oil Pump Drive Chain
‹› Mark direction of rotation before removing.
13
Upper Oil Pan
‹› Removing and installing, refer to --> [ Upper Oil Pan ] See: Upper Oil Pan.
14
Bolt, 9 Nm
15
Bolt
‹› Always replace
‹› Tightening sequence and specification, refer to --> [ Upper Oil Pan Bolt Tightening Sequence and Specification ].
16
Flat Sealing Ring
‹› Always replace.
17
Suction Pipe
‹› Clean strainer if contaminated.
18
O-ring
‹› Always replace.
19
O-ring
‹› Always replace.
20
Non Return Valve
21
Oil Pan Drain Plug, 30 Nm
22
Nut
Not available in the US market.
Lower Oil Pan Bolt Tightening Sequence and Specification