GLI L4-2.0L Turbo (CCTA) (2008)
13 -
Bolt
^
Replace
14 -
Flat sealing ring
^
Replace
15 -
Suction line
^
Clean strainer if contaminated
16 -
O-ring
^
Replace
17 -
O-ring
^
Replace
18 -
Non-return valve
19 -
Oil drain plug
^
30 Nm
Oil Pan, Lower - Tightening Sequence and Tightening Specification
Special tools, testers and auxiliary items required
^
Torque wrench V.A.G 1331
Procedure
-
Tighten new bolts for lower oil pan section in 2 steps in sequence - 1 to 20 - as follows:
-
Tighten bolts to 8 Nm.
-
Tighten an additional 90° (1/4 turn).
Oil Pan, Upper - Tightening Sequence and Tightening specification
Special tools, testers and auxiliary items required
^
Torque wrench V.A.G 1331
Procedure
-
Tighten new upper oil pan section bolts in 2 stages in sequence - 1 to 14 - as follows:
1. Tighten the bolts to 15 Nm.
2. Tighten an additional 90° (1/4 turn).