GLI L4-2.0L Turbo (CCTA) (2008)
-
Place test instrument adapter/DSO (5-pin) VAS 5565 on connector and on fuel delivery unit.
-
Connect remote control V.A.G 1348/3A to test instrument adapter/DSO (5-pin) VAS 5565 and to battery plus (+).
NOTE: This step is needed only to enable the fuel pump to run while the engine is shut off.
-
Remove fuel filler cap from fuel filler tube.
CAUTION:
-
The fuel supply line is under pressure. Wear protective goggles and protective clothing to prevent injuries and contact with skin.
-
Before loosening line connections, place a cloth around the connection point. Then release pressure by carefully pulling off the line.
-
Disconnect fuel supply line - 3 - at the supply location and catch any fuel coming out with a cloth.
NOTE: Pull circlip upward to unlock the fuel line.