GLI L4-2.0L Turbo (CCTA) (2008)
Air Door Actuator / Motor: Service and Repair
Fresh/Recirculating Air Door Motor
Fresh/Recirculating Air Door Motor
Removing
CAUTION!
‹› Switch off all electrical consumers.
‹› Switch ignition off and remove ignition key.
‹› Position of recirculating air door must not be changed.
-
Remove glove compartment.
-
Remove cover - 1 -.
-
Disconnect electrical connection from Fresh/Recirculating Air Door Motor (V154) - 2 -.
-
Remove Fresh/Recirculating Air Door Motor (V154) - 2 - from mounting.
Installing
Install in reverse order of removal, noting the following:
‹› Always check Fresh/Recirculating Air Door Motor (V154) and recirculating air door function after replacing motor.
-
Checking: Use Vehicle Diagnostic, Testing and Information System (VAS 5051/5052) in operating mode "Guided Fault Finding"
-
Replacing: Initiate Basic Setting using Vehicle Diagnostic, Testing and Information System (VAS 5051/5052) in operating mode "Guided Fault
Finding".