GLI L4-2.0L Turbo (CCTA) (2008)
1
Screw
‹› 4 Nm
2
Screws
‹› Qty. 2
‹› 4 Nm
3
Cable bracket
4
Heating and A/C unit
Removing
-
Disconnect condensation water drain hose from heating and A/C unit --> [ Heating and A/C Unit Condensation Water Drain Hose, Checking ] See:
Evaporator Drain Tube/Testing and Inspection.
-
Disconnect electrical connections from heating and A/C unit.
‹› All cable ties opened or cut during air conditioner removal must be reinstalled at the same locations during installation.
‹› The wiring harness "air conditioner" is removed together with the air conditioner unit.
-
Remove screws --> [ 6 Screws ] from bracket--> [ 5 Bracket ].
-
Remove support --> [ 8 Right support ].
-
Remove screws --> [ (item 10) Screws ] and --> [ 12 Screws ] and remove bracket --> [ 11 Bracket ].