GLI L4-2.0L Turbo (CCTA) (2008)
Cigarette Lighter: Service and Repair
Cigarette Lighter Illumination
Cigarette Lighter Illumination
NOTE:
-
On some vehicle equipment levels, socket illumination is via Light Emitting Diode (LED) instead of a bulb. These LEDs are integrated with the
illumination housing and cannot be serviced or replaced separately.
-
Various versions of illumination housing with bulb exist. One version allows separate replacement of the illumination bulb, and another where the
bulb cannot be serviced or replaced separately. In this case, the entire illumination housing must be replaced.
Removing
-
Remove socket receptacle.
-
Depress retainers - arrows - and remove mounting sleeve with bulb holder.
-
Unclip bulb holder from mounting sleeve.