GLI L4-2.0L Turbo (CCTA) (2008)
Drive Belt: Service and Repair
Ribbed Belt
Ribbed Belt
Special tools, testers and auxiliary items required
‹› Locking pin (T10060A)
Removing
CAUTION!
Risk of destroying due to reversed running direction on a used ribbed belt:
‹› Before removing the ribbed belt, marking the running direction with chalk or felt tip pen for reinstallation later.
-
Remove the right charge air hose - arrows -.
-
To release tension on the ribbed belt, rotate the tensioner in the - direction of arrow - using a combination wrench.
-
Secure the tensioner using the (T10060A).
-
Remove the ribbed belt.
Installing
Install in reverse order of removal. When doing this note the following: