GLI L4-2.0L Turbo (CCTA) (2008)
Engine Oil: Testing and Inspection
Engine Oil Level, Checking
Note: The oil level must not exceed the max. marking or the catalytic converter could be damaged.
Test Conditions
^
Engine oil temperature at least 60° C.
^
Vehicle in level position.
^
After stopping engine, wait a few minutes to allow oil to flow back into oil pan.
Test Sequence
-
Pull out oil dipstick, wipe off with a clean cloth and reinsert dipstick again up to stop.
-
Withdraw dipstick again and read oil level.
Range of markings on dipstick:
a - Oil must not be added.
b - Oil may be topped off.
c - Oil must be added.
Note: Oil level must not exceed max. marking - arrow 1 - and must not fall short of min. marking - arrow 2 -.