GLI L4-2.0L Turbo (CCTA) (2008)
/Page-690002.png)
-
Press the accelerator pedal module onto the studs - 6 -.
-
Insert the centering pin - 7 - into the hole on the floor.
-
Secure the accelerator pedal module with the bolt - 3 -.
‹› Tightening specifications, refer to --> [ Accelerator Pedal Module Assembly Overview ] See: Accelerator Pedal Module Assembly Overview.
-
Install the cap - 4 -.
-
Install the footwell trim and nuts - arrows -.
