GLI L4-2.0L Turbo (CCTA) (2008)
Engine Control Module: Service and Repair
Engine Control Module, without Anti-Theft Immobilizer
Engine Control Module, without Anti-Theft Immobilizer
Special tools, testers and auxiliary items required
‹› Vehicle diagnosis, testing and information system (VAS 5051B)
‹› If the Engine Control Module (ECM) is to be replaced, connect the (VAS 5051B) and perform the "Guided Function, Replacing Engine Control
Module".
Removing
-
Turn off the ignition.
-
Remove the wiper arms and plenum chamber cover.
-
Remove plenum chamber bulkhead..
-
Remove the bolts - 1 - and remove the cover plate - 2 -.
-
Disengage the front harness connector - 1 - from the ECM and disconnect it.
-
Pry up the locking mechanism - 2 - slightly.
-
Push the ECM in the - direction of arrow - out of the retaining plate.