GLI L4-2.0L Turbo (CCTA) (2008)
/Page-720002.png)
Checking internal resistance
-
Disconnect the Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) (G130) electrical harness connector - arrow -.
-
Using a multimeter, check the Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) (G130) electrical harness connector terminals
1 to 2 for resistance.
Specified value: 1.0 to 20.0 ohms (at approx. 20 °C)
If the specified value was Not obtained:
