GLI L4-2.0L Turbo (CCTA) (2008)
Electronic Throttle Control Module: Removal and Replacement
Throttle Valve Control Module
Special tools, testers and auxiliary items required
-
Torque wrench V.A.G 1783
Removing
NOTE: Intake manifold assembly overview.
-
Observe rules for cleanliness.
-
Remove charge air guide leading to noise amplifier.
-
Loosen hose clamp - 2 -.
-
Remove bolt - 4 -.
-
Disconnect electrical connector - arrow -.
-
Remove noise insulation.
-
Disconnect charge air hose by lifting clamps - 1 - and loosening hose clamp - 2 -.
-
Remove bolt - 1 - and remove air guide pipe downward.