GLI L4-2.0L Turbo (CCTA) (2008)
-
Disconnect connector - A - and line - B - from Secondary Air Injection (AIR) solenoid valve N112.
NOTE: Press securing ring to disengage the line.
-
Loosen coolant pipe by removing bolts - arrows -.
-
Remove bolts - arrows - and remove Secondary Air Injection (AIR) solenoid valve N112.
Installing
-
Tightening Specifications: Secondary Air Injection (AIR) System assembly overview.
Installation is in reverse order. When doing this note the following:
-
Replace sealing ring.
-
Observe notes after connecting battery.