GLI L4-2.0L Turbo (CCTA) (2008)
‹› The semicircle allows the (T10133/2) to slide farther onto the fuel injector, thus providing the (T10133/2) with a larger contact surface.
-
Mark the modified (T10133/2) with an "A " at the end of the tool number.
Removing
‹› Fuel injector individual parts. Refer to --> [ Fuel Injector Individual Parts ] See: Fuel Rail/Service and Repair/Fuel Rail Assembly Overview.
-
Remove the intake manifold with the fuel rail. Refer to --> [ Intake Manifold with Fuel Rail ] See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair/Intake Manifold With Fuel Rail.
-
Cover the intake ports with clean cloths.
‹› If the fuel injectors remain stuck in the fuel rail, carefully pull them out.
-
Remove the support element - A - downward and disconnect the connector - arrows - from the fuel injectors.
-
Position the (T10133/2A) in the groove on the fuel injector.