GLI L4-2.0L Turbo (CCTA) (2008)
-
Connect fuel injector pressure gauge V.A.G 1318 with fuel line feed adapter V.A.G 1318/23 and adapter for VAG 1318 V.A.G 1318/17A to the
fuel supply line.
-
Connect hose adapter V.A. G 1318/16 to adapter V.A. G 1318/11 of pressure gauge and hold it in a measuring container.
CAUTION:
-
Danger of spraying when opening shut-off valve; wear protective goggles and protective clothing to prevent injuries and contact with
skin.
-
Hold the measuring container in front of free connection of pressure measuring device.
-
Open shut-off valve of pressure gauge. Lever will point in direction of flow - A -.
-
Operate remote control V.A.G 1348/3A. Slowly close shut-off tap, until pressure gauge shows 4 bar. From this point on do not move position of
shut-off tap.
-
Empty measuring container.
-
The quantity of fuel delivered by the fuel pump is dependent upon battery voltage. Connect multi meter V.A.G 1715 to connectors - 1 and 5 - on
test instrument adapter/DSO (5-pin) VAS 5565.
-
Operate remote control connection for 30 seconds and simultaneously measure battery voltage.
-
Compare quantity of fuel delivered with specification.