GLI L4-2.0L Turbo (CCTA) (2008)
CAUTION: Fuel system is under pressure. Before opening high pressure components of the fuel injection system, the fuel pressure must
be relieved to residual pressure, procedures.
-
Remove engine cover.
-
Remove Fuel pressure sensor G247.
-
In place of fuel pressure sensor G247 install adapter VAS 6394/2 and tighten it using tightening specification for fuel pressure sensor G247.
-
Tightening specifications.
-
Open sealing plug - 2 - for digital manometer VAS 6394/1 and install the removed fuel pressure sensor G247 and tighten it.
-
Tightening Specifications.
-
Use test adapter VAS 5570 in order establish the electrical connection between the vehicle and fuel pressure sensor G247 again.