GLI L4-2.0L Turbo (CCTA) (2008)
Conditions
‹› Intake manifold must be removed, removing, refer to --> [ Intake Manifold with Fuel Rail ] See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair/Intake Manifold With Fuel Rail.
Separating
-
Remove the Evaporative Emission (EVAP) canister purge regulator valve - arrow - from the bracket.
-
Loosen the double check valve - 1 - and the fuel line - 2 -.
-
Open the hose clamp - 1 -.
-
Remove both bolts - arrows - from the fuel rail.
-
Disconnect the fuel rail from the intake manifold.
Installing
Install in reverse order of removal. When doing this note the following:
-
Tighten the fuel line.
Tightening specification:
‹› Fuel rail assembly overview. Refer to --> [ Fuel Rail Assembly Overview ] See: Fuel Rail Assembly Overview.
Installing