GLI L4-2.0L Turbo (CCTA) (2008)
Oil Pressure Switch (For Fuel Pump): Locations
Oil Filter, Cooler and Pressure Switch Assembly Overview
1 -
Accessory bracket
2 -
Oil pressure switch F1
^
21 Nm
^
1.4 bar - black
^
Checking.
3 -
Gasket
^
Replace
4 -
O-ring
^
Replace
5 -
O-ring
^
Replace
6 -
Valve unit
7 -
Oil filter element
^
20 Nm
^
See notes. If when repairing an engine, metal shavings or a large quantity of small metal particles are found, this could indicate that the crankshaft
and connecting rod bearings are damaged. To prevent additional damage, perform the following:.
^
Removing and installing
^
Remove and install using oil filter wrench 3417
8 -
Bolt
^
15 Nm
9 -
Connection
10 -
Seal
^
Replace
11 -
Oil cooler