GLI L4-2.0L Turbo (CCTA) (2008)
-
Remove the two bolts - 2 - (9 Nm).
‹› Bolts are microencapsulated and must be replaced after each loosening.
‹› Before installing the new bolts, the threads of the corresponding nuts must be cleaned.
-
Remove connector coupling of rear side airbag - 3 - from mount in side upholstery - 1 -.
-
Remove rear side airbag - 3 - from side upholstery.
Installing
To install, perform the steps used for removal in reverse order.
-
Switch on ignition.
CAUTION!
Make sure that no persons are in the vehicle.
-
Connect vehicle battery..
Seat Occupied Recognition System Assembly Overview
Airbags
Seat Occupied Recognition System Assembly Overview