GLI L4-2.0L Turbo (CCTA) (2008)
-
Unclip pressure hose - 6 - from retainers.
-
Unclip Seat Occupied Recognition Pressure Sensor (G452) - 5 - from retainer, when doing this do not disconnect harness connectors - 3 - or - 4 -
at Seat Occupied Recognition Pressure Sensor (G452) and similarly at Seat Occupied Recognition Control Module (J706) - 2 -.
-
Remove the bolts - 1 - (1.5 Nm).
-
If present, disconnect front seat heating connector - 3 -.
-
Disconnect the black Seat Occupied Recognition Seat Belt Force Sensor (G453) connector - 5 -
-
Disconnect the yellow Front Passenger's Seat Belt Switch (E25) connector - 4 -.
-
If present, disconnect front seat backrest heating connector - 6 -.
-
Cut wiring harness cable ties - 2 -.
-
Slide white bracket - 1 - left and remove from seat frame.
-
Remove all connectors from bracket.
CAUTION!
Do not disconnect harness connector at Seat Occupied Recognition Control Module (J706)!