GLI L4-2.0L Turbo (CCTA) (2008)
Wiring Harness: Service and Repair
Vehicle Electrical System
Vehicle Electrical System
CAUTION:
-
Some tools are supplied with a tool safety clip, which is slid over the tool points after using the tool, in order to protect other workers
from injuries and tool points from damage.
-
When disconnecting and connecting battery, the procedure must be followed as described.
-
Observe the current notes in the corresponding Repair informations for all repairs.
-
Observe country-specific regulations.
-
Before working on electrical system, battery ground (GND) strap must be disconnected. By disconnecting the battery ground (GND) strap (current
disruption), the electrical system is guaranteed to be safe to work on. Disconnection of the battery positive terminal is only required for removal of
the battery.
-
Before starting a repair, the cause of the damage must be eliminated first, e.g. sharp edges on chassis parts, faulty consumers, corrosion etc.
-
Further information, e.g. installing and removing the individual components can be found in the appropriate Repair instructions.
-
Soldering is not permissible for repairs to the vehicle electrical system.