GLI L4-2.0L Turbo (CCTA) (2008)
‹› The (T10096) may only be tightened to a maximum of 20 Nm, since otherwise the threads of the (T10096) will be damaged.
-
Remove the 2 remaining bolts from the subframe.
-
Carefully lower the subframe with its components a maximum 30 mm.
‹› When lowering, ensure that the brake lines and electrical wires have adequate clearance.
-
Remove the brake line - 1 - from the clips - arrows -.
‹› When doing this, the clips will be destroyed and must be replaced.
‹› For illustrative purposes, the illustration shows the subframe removed and from the top.
-
Continue lowering the subframe with attachments.
Installing
Installation is performed in the reverse order of removal. Observe the following when doing so:
Tightening Specifications