volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Procedures|Page 3469 > < Procedures|Page 3467
Page 5
background image

-

Fill 5.5 liter DSG oil. 

To change bottles, shut-off valve can be closed or oil filler adapter (VAS 6262) can be held higher than the transmission. 

-

Move through (VAS 5051) until DSG oil temperature is displayed.

-

Start engine.

-

Press brake and shift into each selector lever position for approx. 3 seconds. Place lever in position P again.

Do not switch engine off!

With a DSG oil temperature of 35° to 45° Celsius:

-

Disconnect quick-release coupling of adapter for oil filling (VAS 6262) with engine running.

-

Let excess oil drain.

-

As soon as oil has run out (it begins to drip), remove adapter for oil filling (VAS 6262) and install bolt with new seal.

Tightening torque: 45 Nm

-

Turn engine off.

Drained oil must not be used to fill again.

Dispose of oil in an appropriate manner.

This completes changing oil and filter.

Oil level in transmission is correctly adjusted.

Procedures|Page 3469 > < Procedures|Page 3467