GLI L4-2.0L Turbo (CCTA) (2008)
Differential: Service and Repair
Differential
Special tools, testers and auxiliary items required
‹› Thrust plate (VW 402)
‹› Punch (VW 408 A)
‹› Thrust disc (VW 412)
‹› Tube (VW 415 A)
‹› Thrust piece (40 - 105)
‹› Thrust pad (3005)
‹› Tube (3259)
‹› Tube (3296)
‹› Tube (3345)
‹› Taper roller bearing puller (V.A.G 1582)
‹› Attachment (V.A.G 1582/6A)
‹› Internal extractor (Kukko 21/7)
‹› Puller (Kukko 18/1)
‹› Separating tool (Kukko 17/1)
‹› Support (Kukko 22/2)
‹› Heat inner race/tapered roller bearing to approximately 100° C before installing.
‹› Always replace both taper roller bearings together as a set.
‹› Adjust differential --> [ Differential, Adjusting ] See: Service and Repair/Overhaul/Differential, Adjusting, when replacing tapered roller bearing,
differential housing, transmission housing or clutch housing.