Volkswagen Workshop Service and Repair Manuals

Repair procedure

•     1 -    Remove trim panel.
•     2 -    Loosen window winder mechanism bolts No 1-6.
  See Fig.1 for front doors and Fig.3 for rear doors.
•     3 -    Wind window up fully and then lower until window lifter bolts No.1 and 2 are in line with slot in door. Front door Fig.2. Rear door Fig.4
•     4 -    Tighten bolts in sequence as in Fig.2 for front door and Fig.4 for rear doors.
•     5 -    Replace trim panel.

→ Fig1    Front door

→ Fig2    Front door

→ Fig 3    Rear door

→ Fig4    Rear door