Volkswagen Workshop Service and Repair Manuals

• ‒ Push in choke cable as far as it will go.

• ‒ → Screw operating cable to clamp of choke valve lever -1- with approx. 5 mm over hang.
• ‒ Loosely attach choke cable to clamp -2-.
• ‒ Push choke cable sleeve in Direction of choke valve lever -direction arrow- of until resistance is felt.

Note:

Operating cable must not be pulled out of instrument panel.

• ‒ Fasten clamp -2- to bracket.
• ‒ Check whether choke cable at carburettor can be pulled right to stop.

• ‒ → Push in choke cable as stop (instrument panel). The weighted lever on the carburettor flap must now no longer be blocked. Try with finger in arrow direction.