Volkswagen Workshop Service and Repair Manuals

(Not vehicles with 2E2 carburettor)

Note:

• ◆ Apply multi-purpose grease to all joints and sliding surfaces.
• ◆ 08.75 ▸ the socket is pressed onto the throttle cable. If this cable is installed in older vehicles, a 2 mm slot must be made in the retainer at the gearbox. The Flexball cable was remplaced by a Bowden cable 11.79 ▸.
• ◆ The Flexball cable has a varying resistance to bending. It is to be installed such that it can be easily bent to the required position. Ensure that it is not twisted on assembly.

• Throttle cable
• ◆ Adjusting
• Accelerator pedal cable
• ◆ Adjusting => page 20-29
• Adjusting nuts, 10 Nm
• Bracket
• Throttle valve lever
• Accelerator pedal stop
• Accelerator pedal
• Operating lever - gearbox
• Gearbox bracket
• Return spring
• ◆ 09.79 ä in conjunction with weaker return spring at carburettor
• Knurled nut