Accident involving triggering of airbag |
Following the renewal of airbag units or the airbag control unit, the labels (only tear-off strips) of the new components must be stuck onto the “Registry note 2 for Airbag Systems”. For registration, the “Registry note 2 for Airbag Systems” must be sent on to the responsible distribution centre or importer. |
The “Registry note 2 for Airbag Systems” can be printed out of the “Technical Service Handbook”: |
→ Technical problem solution |
→ Technical service handbook |
→ Technical problem solutions |
→ Deactivation of airbag units |
In the “Technical Service Handbook 2”, the “Procedure ID” or the “TPL number” for this procedure: “2000987”. |
As a matter of rule, the following components will have to be renewed following an accident where the airbag has been triggered: |
t
| All triggered airbag units with control units and sensors. |
t
| Supports for front passenger module if front passenger airbag was triggered. |
t
| Coil connector with slip ring, when driver airbag has triggered. |
t
| All seat belts with triggered belt tensioners. |
t
| In addition, the following must also be replaced if necessary (visual check): All damaged components. |
|
|
|