volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Removing and installing window crank handle > < Removing and installing front door trim
Removing and installing rear door trim
   
Removing and installing rear door trim
1 - Trim
q   Clipped into door handle body.
2 - Trim
q   On vehicles with electric window regulator
q   Clipped into door handle body.
3 - Trim collar
4 - Clip
5 - Cross-head screw
q   6x for securing the door handle body
6 - Trim clip
q   Two-piece.
q   Bottom part ► 12.93 secured with spreader pin
q   Remove bottom part 01.94 ► with removal pliers -3392-
7 - Trim panel
q   Removing:
–  Unscrew locking knob.
–  Remove window crank → Chapter.
–  Unclip trim → Item or → Item .
–  Remove countersunk bolts → Item.
–  Lever trim out from door with removal lever -80 - 200-.
–  Disconnect electrical connections (window actuator switches, loudspeakers).
8 - Cross-head screw
q   5x for securing the storage compartment
9 - Storage compartment
q   Screwed to rear of trim
q   Loudspeaker screwed onto storage compartment
10 - Loudspeaker cover
q   To remove: press retaining lug down with screwdriver through the opening in the storage compartment -arrow-
11 - Countersunk screw
12 - Door handle body
q   Screwed to rear of trim
13 - Cover
q   Clipped into door handle body.
q   Space for treble speaker
q   When treble speaker is installed, only unclip after removing door trim and dismantling the door handle (risk of damage)

   

Removing and installing window crank handle > < Removing and installing front door trim