volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing the push button > < Removing and installing rear lid lock

Golf Mk3

Adjusting pull rod
Adjusting pull rod
  Note
The pull rod must be adjusted after every installation or repair.
   
–  Pawl catch: insert drill Ø 3.2 mm -1- into bore hole on lock.
–  Pull the pull rod in direction of -arrow- until resistance is felt from the drill.
–  Push in the pull rod and close the connector sleeve.
–  Pull drill out of lock.
–  Perform functional check.
l  Pawl must jump back to end position.
  V55-0272

Removing the push button > < Removing and installing rear lid lock