Golf Mk3
| Assembly overview - bumper cover |
| 1 - | Cover |
| q | Material: PP/EPDM. |
| q | Removing and installing: |
| – | Remove radiator grille → Chapter. |
| – | Unclip outer air intake grilles → Item. |
| – | Pull out clips → Item and → Item. |
| – | Unscrew corner sections → Item. |
| – | Unscrew air duct components from the cover → Item. |
| – | Remove bolts → Item. Pull the cover → Item off the guides → Item and retainers → Item (left- and right-hand sides). |
| 2 - | Clip |
| q | Qty. 6 |
| 3 - | Hexagon nut |
| q | 4 Nm |
| 4 - | Bracket |
| 5 - | Guide |
| q | To remove/install bumper, pull out or push in parallel to guides at left and right. |
| 6 - | Bolt |
| q | Qty. 3 |
| q | 2 Nm |
| 7 - | Spreader nut |
| q | Qty. 3 |
| 8 - | Impact absorber |
| q | Fastened to the cover with four clips. |
| 9 - | Bolt |
| q | 2 Nm |
| 10 - | Corner sections |
| 11 - | Bumper strip |
| q | Clipped into cover → Item. |
| 12 - | Bolt |
| q | Qty. 2 |
| q | 2 Nm |
| 13 - | Bolt |
| q | Qty. 7 |
| q | 6.5 Nm |
| 14 - | Air guide grille |
| q | Clipped into cover -1-. |
| 15 - | Clip |
| q | Qty. 6 |
| 16 - | Spoiler |
| q | Clipped into cover. |
| q | Is not necessary to remove when removing the cover. |
