volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Aligning door window to B pillar > < Adjusting window regulator
Adjusting the height of the door window
Adjusting the height of the door window
  Note
Height can also be adjusted when the door trim is in place.
–  Lower the door window.
  WARNING
If you are only adjusting the height, adjustment may be carried out on the front and rear height stops in parallel.
–  Lower the front height stop as far as it will go.
   
–  Perform adjustment using Torx screwdriver -VAS 3271- through holes in inner door panel -arrows-.
–  Raise the window.
  N57-0019
–  Align the door window to the upper edge of the seal for the door and side windows -arrow A-.
  N57-0031

Aligning door window to B pillar > < Adjusting window regulator