Golf Mk3
Assembly overview - front door |
1 - | Door |
q | Removing and installing → Chapter. |
q | Adjusting - at hinge, within oversized holes. |
2 - | Front window channel |
3 - | Outer window slot seal |
q | Pushed onto flange. |
4 - | Inner window slot seal |
q | Pushed onto flange. |
5 - | Door window |
q | Removing → Chapter. |
q | Adjusting → Chapter. |
6 - | Thrust bearing |
7 - | Inlet key |
q | Adjusting preload on the door window → Chapter. |
8 - | Stopper |
q | Must be converted when renewing the door. |
9 - | Hexagon head bolt |
10 - | Rear window channel |
11 - | Cover |
q | For closing the impact carrier/mounting hole. |
12 - | Window regulator |
q | Removing and installing → Chapter. |
13 - | Hexagon head bolt |
q | 23 Nm |
14 - | Impact carrier |
15 - | Shell/door arrester |
16 - | Door arrester |
17 - | Hexagon head bolt |
q | 7.5 Nm |
18 - | Bolt |
19 - | Locking nut |
q | 6.5 Nm |
20 - | Door arrester cover |
q | Self-adhesive - is stuck onto A pillar. |
21 - | Cover |
22 - | Grub screw |
q | 23 Nm |
23 - | Torx screw T45 |
q | 36 Nm |
24 - | Door hinge |
q | Screwed to the door and to A pillar. Hinge bolt inserted into compartment section and secured with a grub screw. |