volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Removing and installing batteries for hinged main key with remote control system > < Removing
Installing
Installing
  Note
Note the polarity and correct position when installing the batteries.
   
–  Place the battery -4- with the positive terminal downwards into the sender unit (positive terminal is marked on housing).
–  Now place the contact plate -3- on the battery-4-.
–  Place battery -2- with the positive terminal downwards onto the contact plate and secure.
–  Place sender unit -1- and sender unit -5- together and clip together.
–  Then engage the transmitter unit with the main key.
  N01-0104

Removing and installing batteries for hinged main key with remote control system > < Removing