Renewing left-hand flange shaft or right-hand drive flange oil seals (gearbox installed)
Renewing right-hand drive flange oil seal
Special tools, testers and auxiliary items
-
◆ Socket 6 mm AF V.A.G 1669
-
◆ Press piece 3158
-
◆ Drip tray
Additional information
-
◆ Workshop Manual Golf 1992 ▸, Vento 1992▸, Running gear
Removing
-
‒ Only loosen drive shaft/wheel hub nut and wheel bolts when vehicle is standing on its own wheels.
-
‒ Remove wheel.
-
‒ Remove drive shaft
=> Running gear; Repair group 40
-
‒ Remove cap by piercing cap centre with a screwdriver and levering out.
-
‒ Place container under the gearbox.
-
‒ Remove drive flange/output shaft counter sunk head bolt with V.A.G 1669 or 6 mm socket insert (commercially available) and counter hold against turning with a drift.
-
‒ Pull drive flange/output shaft out.
-
‒ Lever drive flange seal out.
|