Connect fault reader -V.A.G 1551-, enter address word “02 - Gearbox electronics” and advance until “Select function XX” is shown on display → Chapter.
Indicated on display:
–
Press buttons 0 and 8. (“Read measured value block” is selected with 08.)
Rapid data transfer HELP
Select function XX
Indicated on display:
–
Confirm entry with Q key.
Rapid data transfer Q
08 - Read measured value block
Indicated on display:
–
Enter display group number ⇒ List of selectable display group numbers → Chapter.
–
Confirm entry with Q key.
Read measured value block
Enter display group number XX
–
There are always 4 display zones -arrows- in the measured value block (if necessary in physical quantities). Interpreting individual values in display zones 1 to 4 → Chapter.