Golf Mk3
Part II |
1 - | Pressure control valve |
q | For crankcase breather |
q | Only engine codes: 2E, ADY, AGG, AKR |
2 - | Sealing cap |
q | Renew seal if damaged |
3 - | 10 Nm |
4 - | Cylinder head cover |
q | For engine codes AAM, ABS ANN, ANP and ADZ plate cover with reinforcement strip |
5 - | Oil deflector |
6 - | Cylinder head bolt |
q | Observe sequence when loosening and tightening → Chapter. |
7 - | Cylinder head cover gasket |
q | Renew if damaged |
q | For engine codes AAM, ABS, ADZ, ANN and ANP: 3-part, always renew |
q | Before fitting coat transition points between bearing cap and cylinder head with sealant -D 454 300 A2-. |
8 - | Cylinder head |
q | Removing and installing → Chapter |
q | If renewed, change coolant in entire system |
9 - | Cylinder head gasket |
q | Renew |
q | If renewed, change coolant in entire system |
10 - | Lifting eye |
11 - | Camshaft gear |
q | Note position when installing toothed belt → Chapter. |
12 - | From crankcase breather. |
q | → Item |
q | For engine codes ABS, ADZ and ANP the crankcase breather is elongated by a metal line |