Golf Mk3
Performing self-diagnosis
Erasing fault memory
Requirement:
After fault memory has been interrogated: |
→ Indicated on display: |
|
||
|
→ Indicated on display: |
|
||
|
→ Readout in display: |
|
||
Note: If the ignition was switched off e.g. between interrogating the fault memory and erasing fault memory, the fault memory is then not erased.
|
→ Indicated on display: |
|
||
(The fault memory will be erased approx. 5 secs. after the display appears.) The fault memory is now erased. Note: Wait about 1 minute before again interrogating the fault memory. |
→ Indicated on display: |
|
|
→ Print out with printer switched on: |
|
|||
System (control unit -J327-) was not given time to recognise faults.
When the fault memory is interrogated, the following display should appear: "No fault recognized!" |