|
Self-diagnosis
Read measured value block and basic settings
The measured values in the functions read measured value block and basic setting are described during the individual component test. This table serves only as an overview.
Depending upon the version of the control unit not all display groups can be selected (e.g. control unit ▸1H0 907 311 J display group 00 only).
Note:
To change to another display group proceed as follows:
|
|
|---|
|
Display group
|
V.A.G 1551
|
V.A.G 1552
|
|
Higher
|
Press key 3
|
Press ↑key
|
|
Lower
|
Press key 1
|
Press ↓key
|
| 
