Volkswagen Workshop Service and Repair Manuals

Note:

When assembling ensure that the coupling item 12 can be moved slightly on the pin item 13 and that the clearance to distributor shaft item 6 is not restricted.

• Screening cap
• Distributor cap
• ◆ Check for cracks and signs of tracking
• ◆ Check contact wear
• ◆ Clean before fitting
• ◆ Check carbon brush for wear and freedom of movement

• Rotor arm
• ◆ 0.6...1.4 kω
• ◆ After removing screwed version replace with bonded version
• ◆ Renewing rotor arm (bonded version)
  
• 5 Nm
• Dust cap
• Distributor shaft
• ◆ Before removing mark relationship of distributor shaft to coupling,
  item 12
• ◆ Pull out after removing the spring pin item 13
• Shim(s)
• Hall sender (G40)*
• ◆ Checking => Page 28-29

• Distributor body
• O ring
• ◆ Renew if damaged
• Plastic washer
• Coupling
• ◆ Before removing mark relationship of coupling to distributor shaft, item 6
• Spring pin
• ◆ Renew
• Retaining clip