Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Golf Mk3

Power unit > Simos injection and ignition system > Mixture preparation system, electronic inj.,Gas > Simos injection and ignition system > Fitting locations overview

Simos injection and ignition system
Simos injection and ignition system
Fitting locations overview

Engine codes ADY, AGG, AKR

  • Activated charcoal filter solenoid valve 1 (N80)
    • ◆ Activated charcoal filter system

=> Repair group 20; removing and installing parts of the fuel supply system; servicing activated charcoal filter system

  • Air mass meter (G70)*
  • 4 pin connector
    • ◆ For Lambda probe and Lambda probe heating
  • Throttle valve control part
 
N24-0161
  • Simos injection and ignition system control unit (J361)
  • Injector (N30...N33)
  • Fuel pressure regulator
  • Ignition transformer (N152)
    • ◆  , item 17
  • Speedometer sender (G22)
  • 3 pin connector
    • ◆ For knock sensor
    • ◆ Brown
  • Central connector
  • Engine speed sender (G28)
  • 3 pin connector
    • ◆ For engine speed sender
    • ◆ Black
 
N24-0161
  • Distributor with Hall sender (G40)
    • ◆ 
  • Coolant temperature sender (G62)
    • ◆ Black, with temperature gauge sender (G2)
  • Knock sensor 1 (G61)
  • Earth connection
  • Intake air temperature sender (G42)
  • Activated charcoal filter
    • ◆ Below air cleaner
    • ◆ Activated charcoal filter system

=> Repair group 20; removing and installing parts of the fuel supply system; servicing activated charcoal filter system

 
N24-0386

Engine codes AFT, AKS

  • Activated charcoal filter solenoid valve 1 (N80)
    • ◆ Below air cleaner
    • ◆ Activated charcoal filter system

=> Repair group 20; removing and installing parts of the fuel supply system; servicing activated charcoal filter system

  • 4 pin connector
    • ◆ For Lambda probe and Lambda probe heating
  • Injector (N30...N33)
  • Throttle valve control part (J338)
  • Simos injection and ignition system control unit (J361)
  • Intake manifold change-over valve (N156)
 
N24-0386
  • Ignition transformer (N152)
    • ◆ With output stage (N157)
    • ◆ => Page 28-2 , item 7
  • Speedometer sender (G22)
  • Coolant temperature sender (G62)
    • ◆ Black, with temperature gauge sender (G2)
  • Central connector
  • 3 pin connector
    • ◆ For knock sensor
    • ◆ Blue
  • 3 pin connector
    • ◆ For engine speed sender
    • ◆ Black
  • Engine speed sender (G28)
 
N24-0386
  • Distributor with Hall sender (G40)
  • Intake air temperature sender (G42)
  • Intake manifold change-over vacuum unit
  • Knock sensor 1 (G61)
  • Earth connection
  • Fuel pressure regulator
  • Air mass meter (G70)
  • Activated charcoal filter
    • ◆ Below air cleaner
    • ◆ Activated charcoal filter system

=> Repair group 20; removing and installing parts of the fuel supply system; servicing activated charcoal filter system

Power unit > Simos injection and ignition system > Mixture preparation system, electronic inj.,Gas > Simos injection and ignition system > Fitting locations overview

[PREV PAGE] [NEXT PAGE]