Golf Mk3
| Assembly overview - hydraulic unit, brake servo/brake master cylinder, LHD |
Note| The pump and valve block must not be separated from one another. |
| 1 - | Brake servo |
| 2 - | Tandem brake master cylinder |
| 3 - | Brake fluid reservoir |
| 4 - | Cover |
| 5 - | Self-locking nut, 25 Nm |
| 6 - | Bolt, Torx socket head -T25-, 4 Nm |
| 7 - | Bolt, Torx socket head -T25-, 8 Nm |
| 8 - | Rubber damper |
| 9 - | Spring retainer |
| 10 - | ABS hydraulic unit |
| 11 - | Control unit |
| 12 - | Brake pipe connection |
| q | Hydraulic unit to front right brake caliper |
| 13 - | Brake pipe connection |
| q | Hydraulic unit to rear left wheel cylinder/brake caliper |
| 14 - | Brake pipe connection |
| q | Hydraulic unit to rear right wheel cylinder/brake caliper |
| 15 - | Brake pipe connection |
| q | Hydraulic unit to front left brake caliper |
| 16 - | Brake line |
| q | Master brake cylinder/secondary piston circuit to hydraulic unit |
| 17 - | Brake line |
| q | Brake master cylinder/primary piston circuit to hydraulic unit |
