Electrical check of the ABS and ABS/EDL ITT Mark 04
Electrical check of the ABS and ABS/EDL ITT Mark 04
Special tools required
Test box V.A.G 1598
|
Adapter V.A.G 1598/10
|
Adapter set V.A.G 1594
|
Hand multimeter V.A.G 1526
|
The test steps from Page 01-57
are valid for:
-
◆ Vehicles on which the self diagnosis does not give any indication of the source of the fault. => Work through the complete electrical check.
-
◆ Vehicles on which the self diagnosis provides a direct indication of the source of the fault. => Only carry out the test steps recommended in the fault table (pin-pointed entry).
Note:
Test steps which are necessary for vehicles with ABS/EDL, have an addendum "EDS" in the "Test step" column.
|