volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Contact assignment of multi-pin connector > < Electrical check of the ABS and ABS/EDL ITT Mark 04
Running gear self-diagnosis for ABS
Electrical check of the ABS and ABS/EDL ITT Mark 04
Test prerequisites
 
V45-0144
  • ● Fuses S4, S20, S53, S54 OK.
  • ● Control unit (J104) earth wires OK.
  • ◆ → Up to 01.93 under the right sill panel trim
 
N29-0003
  • ◆ → From 01.93 under the rear seat near control unit
  • ● Switch ignition and electrical consumers off before commencing the check (headlights, lighting, fan ...).
 
V29-0047
  • ● → Unplug multi-pin connector from control unit (J104) =>Page 01-86 and connect test box V.A.G 1598 with adapter V.A.G 1598/10 -1- to the wiring loom connector -2-.

The control unit -3- is not connected!

  • ● The specifications are matched to the V.A.G 1526 and do not necessarily apply to other test equipment.

Contact assignment of multi-pin connector > < Electrical check of the ABS and ABS/EDL ITT Mark 04