Volkswagen Workshop Service and Repair Manuals

Removing

• ‒ → Remove cap by pressing back the locking devices -arrows-.
• ‒ Slide cap to side and take off.
• ‒ Pull off connector
• ‒ Release spring wire clip from locking device and fold away.
• ‒ Pull bulb out of reflector.

•      1 -     Connector

•      2 -     Retaining clip
•      3 -     Dip beam bulb
•      4 -     Spring wire clip
•      5 -     Connector
•      6 -     Main beam bulb
•      7 -     Side light bulb

Installing

• ‒ Do not touch bulb glass.
• ‒ Insert new bulb so that the lugs on the laminated plate align with the grooves in the reflector.
• ‒ After installing a new bulb check headlight settings.

Removing and installing side light bulb

• ‒ By pulling on connector pull bulb with holder out of reflector.
• ‒ After changing bulb, push bulb with holder fully into the reflector.